How to Keep Job Site Fuel Tanks Clean Between Moves
Follow these four simple maintenance steps to keep your fuel tanks clean and ready to be moved to a new job site.
First, ensure your equipment can be properly sealed from moisture intrusion.
Second, keep track of the age of the fuel to ensure you are continually cycling good quality fuel from the same supplier.
Third, inspect the tank for sediment, contamination, water, or signs of rust monthly.
Four, drain water from the tank at least once every quarter.
Why Moving a Fuel Storage Tank Stirs Up Trouble
Every fuel tank collects sediment on its floor. Rust, scale, dust, and dead microbial growth settle there over time. In a parked tank, that layer mostly stays put.
A job site tank doesn’t stay parked. It rides on a trailer or a forklift from one phase to the next. Every bump and turn kicks that bottom layer back into the fuel. If someone fuels a loader an hour after the move, the dirtiest fuel in the tank goes straight into the machine.
Fast refills do the same thing. A high-flow delivery churns the tank and lifts sediment off the floor. Water that had settled out gets mixed back in too.
Mixed Suppliers Bring Mixed Quality
Many job sites buy fuel from whoever can get there fastest. One load comes from a regional supplier. The next comes from a card lock on the way in. Each one carries its own water, particulate, and additive levels.
Mixing those loads in one tank makes quality hard to track. One wet or dirty delivery contaminates everything already in the tank. When filters start clogging, nobody can say which load caused it.
Why Modern Tier 4 Equipment Can Be The First to Show Fuel Quality Issues
Tier 4 excavators, dozers, and generators use high-pressure common rail fuel systems. Their injectors work at very tight tolerances. Particles that an older mechanical engine would pass through can scar those injectors.
The first sign is usually a filter that clogs well before its service interval. Next come injector fault codes, derates, and rough running. Most common rail engine makers call for fuel at ISO 4406 code 14/13/11 or cleaner. Our guide to what particulate count and ISO cleanliness codes mean explains those numbers.
Detailed Steps for Keeping Your Mobile Fuel Tank In Top Shape
- Let the tank settle. After a move or a big refill, wait several hours before you dispense. Overnight is better.
- Keep fill points closed and clean. Job site dust has a nasty habit of working its way into everything. Wipe caps before opening them. Cap hoses and nozzles when they’re not in use.
- Drain water monthly. Pull a sample from the tank’s low point. Drain any water or sludge you see.
- Stick with one tested supplier. Ask how your supplier checks each load for water and particulate. One consistent source makes problems easier to trace.
- Filter at the dispenser. A water-blocking filter on the nozzle catches dirt and free water before it reaches a machine. Change it on schedule.
- Keep tanks fuller during slow stretches. Less empty space means less condensation when equipment sits idle in winter.
- Test after anything unusual. A new supplier, a long idle period, or a string of clogged filters all justify a fuel test.
When Are Good Fuel Management Procedures Not Enough
Applying good management procedures to an old unmanaged tank will not undo years of neglect. Years of buildup will sit on the bottom of the tank, only to be dislodged during a move. Adding better habits to an already contaminated tank will not solve the existing problems that fuel has.
But don’t worry, if your tank or fuel is too far gone we can still help.
Fuel polishing filters the fuel already in the tank back down to a clean target, often without draining it. Tanks with heavy sludge, rust, or microbial growth need a full diesel tank cleaning first. Otherwise the clean fuel gets dirty again on the next move.
For some sites, the simplest fix is fewer moves of stored fuel. Fleet Core delivers fuel directly to equipment on site from tested loads. That cuts out the job site tank as a source of contamination.
Job site tanks can also bring paperwork duties. Under EPA rules, sites with more than 1,320 gallons of total aboveground oil storage may need a spill prevention plan.
Contact Fleet Core to test your job site fuel or set up on-site fueling
Frequently Asked Job Site Fuel Questions
Why do my job site fuel filters keep clogging?
Moving or quickly refilling a tank stirs settled sediment and water back into the fuel. Mixed loads from several suppliers add uneven quality on top of that. Filters catch it first, so early clogging is usually the earliest sign.
How long should fuel settle after moving a job site tank?
Wait at least several hours before dispensing after a move or a large refill. Overnight is better. That gives sediment and free water time to drop back to the tank floor.
Can dirty fuel damage Tier 4 equipment?
Yes. Tier 4 engines use high-pressure common rail injectors with very tight tolerances. Particulate that an older engine would tolerate can wear those injectors, trigger fault codes, and complicate warranty claims.
How often should job site fuel be tested?
Test at least quarterly, and after any delivery from a new supplier. Also test after a long idle stretch or any run of early filter clogging.
Is fuel polishing or tank cleaning better for a job site tank?
Polishing cleans the fuel itself and works well for tanks with light contamination. Tanks with heavy sludge or rust on the floor need cleaning first, or the polished fuel gets dirty again on the next move.